NSN 5905-00-542-7598 · NIIN 005427598 · FSC 5905
NO DASHES 5905005427598
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.360 AND INCHES MAXIMUM 0.390 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 2.135 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.251 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 250.000 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.530 AND INCHES MAXIMUM 0.780 |
| FEAT | SPECIAL FEATURES | MOUNTING METHOD: LOCKING BUSHING W/PANEL SEAL |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.844 AND INCHES MAXIMUM 0.906 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 4.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 105.0 |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 9:00 OCLOCK |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 128.00 |
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.516 AND INCHES MAXIMUM 0.546 |
| AXGY | MOUNTING METHOD | LOCKING BUSHING |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 280.0 AND MAXIMUM 305.0 |
| AEDX | SHAFT STYLE | |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.374 AND INCHES MAXIMUM 1.686 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.500 AND INCHES MAXIMUM 1.710 |
| AAPN | SECTION QUANTITY | 1 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 280.0 AND MAXIMUM 305.0 |
| AAQL | BODY STYLE |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-R-19/3 | 81349 |
| RA20A1SD251AJ | 81349 |
| MIL-PRF-19/3 | 81349 |
| RA30NASD251A | 81349 |
| 8340A117 | 98905 |
| 8340A117CTS | 98905 |
| RA30NASD251A | 07860 |
Supersedes
This item replaces cancelled NIINs 000116688 · 002579483 · 007025884. An older drawing citing one of those numbers resolves here.