NSN 5905-00-553-8197 · NIIN 005538197 · FSC 5905
NO DASHES 5905005538197
In Stock
RESISTOR,FIXED,WIRE WOUND,INDUCT
Resistor
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPP | ELECTRICAL RESISTANCE | KILOHMS 15.000 |
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -30.0 TO 30.0 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.876 AND INCHES MAXIMUM 2.000 |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | INCHES MINIMUM 1.552 AND INCHES MAXIMUM 1.572 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.376 AND INCHES MAXIMUM 0.500 |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.860 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.532 AND INCHES MAXIMUM 0.656 |
| AEFB | POWER DISSIPATION RATING IN WATTS | FREE AIR 10.000 |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | CELSIUS 25.0 |
| AFWW | TERMINAL WIDTH | INCHES MINIMUM 0.140 |
| AKNA | INCLOSURE TYPE | ENCASED |
| BYML | MOUNTING HOLE SIZE | INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.130 |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-39009 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-39009 TO 1 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.656 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 810-391-05 | 25965 |
| MIL-R-39009/1 | 81349 |
| MILR18546 | 81349 |
| RE70G1502 | 81349 |
| RER75F1502R | 81349 |
| RE75G1502 | 81349 |
| RER75F1502P | 81349 |
| MIL-PRF-39009/1 | 81349 |
| RH50-1502F50W | 91637 |
| ASC1502657 | Z4779 |
Supersedes
This item replaces cancelled NIIN 008549764. An older drawing citing one of those numbers resolves here.