NSN 5905-00-553-9156 · NIIN 005539156 · FSC 5905
NO DASHES 5905005539156
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
43 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.00100 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 4.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.001 |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -1.0 TO 1.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 4 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 360.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.50 |
| AFJN | FRAGILITY FACTOR | RUGGED |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 1.00 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 1.7500 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -1.00 TO 1.00 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 80.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| ADAU | BODY HEIGHT | INCHES MAXIMUM 2.750 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 2.0000 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.815 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 25.0 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 1.00 |
| CRJS | FIXED TAP QUANTITY PER SECTION | SINGLE SECTION 3 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | OHMS SINGLE SECTION -2.0 TO 2.0 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT SLEEVE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 20.000 |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | SINGLE SECTION 500.000 |
| AEGA | LATERAL RUNOUT | INCHES 0.001 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.750 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0780 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 2.109 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.284 |