NSN 5905-00-556-2463 · NIIN 005562463 · FSC 5905
NO DASHES 5905005562463
In Stock
RESISTOR,FIXED,WIRE WOUND,INDUCT
Resistor
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AAQD | HEAT SINK HEIGHT | INCHES 2.000 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.531 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.562 |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 |
| AAQA | HEAT SINK LENGTH | INCHES 7.000 |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | CELSIUS 25.0 |
| AFWW | TERMINAL WIDTH | INCHES MINIMUM 0.140 |
| AKNA | INCLOSURE TYPE | ENCASED |
| BYML | MOUNTING HOLE SIZE | INCHES NOMINAL 0.125 |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| AAQB | HEAT SINK WIDTH | INCHES 5.000 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.062 |
| AAPP | ELECTRICAL RESISTANCE | OHMS 174.000 |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | INCHES NOMINAL 0.719 |
| MATT | MATERIAL | HEAT SINK ALUMINUM ALLOY |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-39009 |
| AEFB | POWER DISSIPATION RATING IN WATTS | FREE AIR 8.000 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES NOMINAL 0.781 |
| AAQE | HEAT SINK THICKNESS | INCHES 0.040 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 |
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -30.0 TO 30.0 |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.438 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| RER70F1740R | 81349 |
| RE70G1740 | 81349 |
| MILR39009-1 | 81349 |
| MILR18546 | 81349 |
| MIL-PRF-39009/1 | 81349 |
| RH50-175F | 91637 |
| RH50-1750HMP0R1PCT | 91637 |
Supersedes
This item replaces cancelled NIIN 008552573. An older drawing citing one of those numbers resolves here.