NSN 5905-00-556-4645 · NIIN 005564645 · FSC 5905
NO DASHES 5905005564645
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.605 AND INCHES MAXIMUM 0.645 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.953 AND INCHES MAXIMUM 0.983 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 4.0 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.8750 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | INCHES NOMINAL 1.250 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 3 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 2.000 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| AXGY | MOUNTING METHOD | THREADED HOLE(S) |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 10.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.7500 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.15 TO 0.15 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED UPPER ADJACENT SIDE SINGLE ROW |
| AAQL | BODY STYLE | |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 356.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 2.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 1.00 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.164 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.593 AND INCHES MAXIMUM 1.628 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.875 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 2.000 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 5617-107-0 | 73138 |
| 1166260 | 10001 |
| 1700-566 | 11534 |