NSN 5905-00-560-1033 · NIIN 005601033 · FSC 5905
NO DASHES 5905005601033
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 71.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -5.0 TO 5.0 |
| AEFY | SHAFT END PLAY | INCHES 0.00500 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 290.0 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.7500 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.28 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 290.0 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.750 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CRJS | FIXED TAP QUANTITY PER SECTION | ALL SECTIONS 1 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 8 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.1245 AND INCHES MAXIMUM 0.1248 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.812 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.312 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 0.8750 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | DEG ANGULAR ROTATION ALL SECTIONS -3.0 TO 3.0 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0630 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 6.500 |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | ALL SECTIONS 145.0 |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -20.0 TO 20.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 0.5 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.28 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.20 TO 0.20 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAPN | SECTION QUANTITY | 2 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.875 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 450-2229 | 81413 |
| 100823-000 | 81413 |
| 210-3280 | 94486 |
| 1200-612 | 11534 |