NSN 5905-00-572-9202 · NIIN 005729202 · FSC 5905
NO DASHES 5905005729202
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0760 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 2.0380 AND INCHES MAXIMUM 3.0620 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 4.844 AND INCHES MAXIMUM 4.969 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.995 AND INCHES MAXIMUM 1.005 |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 60.0 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.249 AND INCHES MAXIMUM 0.250 |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 120.0 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 5.839 AND INCHES MAXIMUM 5.974 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 2.427 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 3.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1ST SECTION 2 AND 2ND SECTION 2 AND 3RD SECTION 2 AND 4TH SECTION 2 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 1ST SECTION -10.0 TO 10.0 AND 2ND SECTION -10.0 TO 10.0 AND 3RD SECTION -10.0 TO 10.0 AND 4TH SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION 360 DEG SINE-COSINE |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | INCHES NOMINAL 1.750 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 360.0 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0750 AND INCHES MAXIMUM 0.0850 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 2.038 AND INCHES MAXIMUM 3.062 |
| AAPN | SECTION QUANTITY | 4 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.7490 AND INCHES MAXIMUM 0.7500 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0260 AND INCHES MAXIMUM 0.0310 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -1.00 TO 1.00 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 85.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 25.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 24 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| BYDT | BEARING TYPE | SHAFT BEARING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 20.000 AND KILOHMS 2ND SECTION 20.000 AND KILOHMS 3RD SECTION 20.000 AND KILOHMS 4TH SECTION 20.000 |
| AXGY | MOUNTING METHOD | THREADED HOLE(S) AND CLAMP RING(S) |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 2.00 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.138 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 98656 | 36378 |
| RVP3S98 | 99957 |
| 55-125-001 | 18065 |