NSN 5905-00-577-3973 · NIIN 005773973 · FSC 5905
NO DASHES 5905005773973
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.570 AND INCHES MAXIMUM 0.670 |
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.516 AND INCHES MAXIMUM 0.546 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.100 AND INCHES MAXIMUM 1.310 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 290.0 AND MAXIMUM 305.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.414 AND INCHES MAXIMUM 1.576 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.360 AND INCHES MAXIMUM 0.390 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-19 TO 2 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.844 AND INCHES MAXIMUM 0.906 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 128.00 |
| AAQL | BODY STYLE | |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 250.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 290.0 AND MAXIMUM 305.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 105.0 |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 9:00 OCLOCK |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-19 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.251 |
| AAPN | SECTION QUANTITY | 1 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AEDX | SHAFT STYLE | |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 1.750 |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 867-32522-29 | 32770 |
| 026TB28S251B1A1 | 3C3V5 |
| 026TB28S251B1A1 | 517W0 |
| 600100 | 52542 |
| 867-32522-29 | 71450 |
| A20NASD251A | 7A378 |
| MIL-PRF-19/2 | 81349 |
| RA20NASD251A | 81349 |
| MIL-R-19 | 81349 |
| PM-250 | 00062 |
| SERIES43 | 12697 |
| 43M250OHMPORM10PCT | 12697 |
Supersedes
This item replaces cancelled NIINs 001736957 · 006661034 · 007744599 · 009114413. An older drawing citing one of those numbers resolves here.