NSN 5905-00-583-1428 · NIIN 005831428 · FSC 5905
NO DASHES 5905005831428
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 5.0 |
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.516 AND INCHES MAXIMUM 0.546 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 280.0 AND MAXIMUM 305.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 128.00 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-19 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-19 TO 3 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.530 AND INCHES MAXIMUM 0.780 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 2.135 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 280.0 AND MAXIMUM 305.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 105.0 |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 9:00 OCLOCK |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.999 AND INCHES MAXIMUM 1.311 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.500 AND INCHES MAXIMUM 1.710 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.500 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.375 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 4.0 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1655-081 | 31361 |
| MIL-PRF-19/3 | 81349 |
| RA30NASA502A | 81349 |
| MILR19 | 81349 |
| 4171780-107 | 82577 |
| KS8680 | 06KW9 |
Supersedes
This item replaces cancelled NIINs 001085597 · 001739159 · 007020518 · 008062962. An older drawing citing one of those numbers resolves here.