NSN 5905-00-588-8755 · NIIN 005888755 · FSC 5905
NO DASHES 5905005888755
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -2.00 TO 2.00 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| AEGA | LATERAL RUNOUT | INCHES 0.002 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MAXIMUM 3.1400 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.1200 AND INCHES MAXIMUM 0.1300 |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | INCHES MINIMUM 1.490 AND INCHES MAXIMUM 1.510 |
| AEDX | SHAFT STYLE | |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 2.630 AND INCHES MAXIMUM 2.760 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.1920 AND INCHES MAXIMUM 0.2020 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.138 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.1200 AND INCHES MAXIMUM 0.1300 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 28.27 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.375 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 1.090 AND INCHES MAXIMUM 1.150 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.311 AND INCHES MAXIMUM 1.323 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 3.445 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION 360 DEG COSINE |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 3 |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 90.0 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.00150 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.001 |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| AXGY | MOUNTING METHOD | THREADED HOLE(S) |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.473 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 2.0570 AND INCHES MAXIMUM 2.0670 |
| AEFY | SHAFT END PLAY | INCHES 0.005 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 2.995 AND INCHES MAXIMUM 3.005 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 180.0 |