NSN 5905-00-593-5185 · NIIN 005935185 · FSC 5905
NO DASHES 5905005935185
In Stock
RESISTOR,FIXED,WIRE WOUND,INDUCT
Resistor
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQE | HEAT SINK THICKNESS | INCHES 0.040 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275.0 |
| STYL | STYLE DESIGNATOR | |
| MATT | MATERIAL | HEAT SINK ALUMINUM ALLOY |
| AAQB | HEAT SINK WIDTH | INCHES 5.000 |
| AAQD | HEAT SINK HEIGHT | INCHES 2.000 |
| AARG | RELIABILITY INDICATOR | ESTABLISHED |
| AARH | RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.010 |
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 |
| AAPP | ELECTRICAL RESISTANCE | OHMS 8.060 |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 |
| AFWW | TERMINAL WIDTH | INCHES MINIMUM 0.140 |
| AKNA | INCLOSURE TYPE | ENCASED |
| BYML | MOUNTING HOLE SIZE | INCHES NOMINAL 0.125 |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.594 |
| ABJT | TERMINAL LENGTH | INCHES NOMINAL 0.438 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.938 |
| AEHY | AMBIENT TEMP AT FULL RATED POWER | CELSIUS 25.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILR39009 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 275.0 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.625 |
| AAQA | HEAT SINK LENGTH | INCHES 7.000 |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | INCHES NOMINAL 1.562 |
| AEFB | POWER DISSIPATION RATING IN WATTS | FREE AIR 10.000 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES NOMINAL 0.844 |
Cross-references
14 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 421414-1 | 80020 |
| BACR14CH8R060CF | 81205 |
| RE75G8R06 | 81349 |
| MILR18546 | 81349 |
| MILR39009-1 | 81349 |
| MIL-PRF-39009/1 | 81349 |
| RER75F8R06R | 81349 |
| RER75F8R00R | 81349 |
| RER75F8R06P | 81349 |
| RH50-8R060HMSP0RM3PCT | 91637 |
| RH50-080HM1PCT | 91637 |
| 46332-4 | 98853 |
| RER75F8R06R | 09969 |
| RH-50-8.0 | 09969 |
Supersedes
This item replaces cancelled NIINs 014283225 · 008424321. An older drawing citing one of those numbers resolves here.