NSN 5905-00-593-8253 · NIIN 005938253 · FSC 5905
NO DASHES 5905005938253
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS TABLE |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 17 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 4.055 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 3.10 |
| AEFY | SHAFT END PLAY | INCHES 0.001 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0930 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 357.0 AND MAXIMUM 359.0 |
| CRJS | FIXED TAP QUANTITY PER SECTION | 5TH SECTION 2 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 4.30 |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 1ST SECTION 10.0 AND 2ND SECTION 300.0 |
| AAQL | BODY STYLE | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 10001-1472219 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 2.8740 AND INCHES MAXIMUM 2.8750 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.656 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 3.305 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 3.256 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 3.0000 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 2.825 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0730 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 3.000 |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | MEGOHMS ALL SECTIONS 5.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 2.0 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.249 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | 1ST SECTION -3.00 TO 3.00 AND 2ND SECTION -1.00 TO 1.00 AND 3RD SECTION -1.00 TO 1.00 AND 4TH SECTION -1.00 TO 1.00 AND 5TH SECTION -1.00 TO 1.00 |
| AAPN | SECTION QUANTITY | 5 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |