NSN 5905-00-617-2730 · NIIN 006172730 · FSC 5905
NO DASHES 5905006172730
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 6.00 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.359 AND INCHES MAXIMUM 0.391 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.250 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 0.953 |
| AEDX | SHAFT STYLE | |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 80.00 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 295.0 AND MAXIMUM 305.0 |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -55 DEG CELSIUS SINGLE SECTION -3.0 TO 0.0 AND -25 DEG CELSIUS SINGLE SECTION -5.0 TO 10.0 AND 25 DEG CELSIUS SINGLE SECTION -5.0 TO 10.0 AND 120 DEG CELSIUS SINGLE SECTION 0.0 TO 3.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 120.0 |
| CQPH | DEVICE DESIGN TYPE | AT 9:00 OCLOCK NONTURN |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.5 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.828 AND INCHES MAXIMUM 0.922 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.719 AND INCHES MAXIMUM 0.781 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-94 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-94 TO 2 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MAXIMUM 0.391 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AAQL | BODY STYLE | |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.469 AND INCHES MAXIMUM 0.531 |
| AXGY | MOUNTING METHOD | LOCKING BUSHING |
| CBBL | FEATURES PROVIDED | SHAFT LOCKING DEVICE |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.950 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 1.0 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.124 AND INCHES MAXIMUM 0.126 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.359 AND INCHES MAXIMUM 0.391 |
Cross-references
10 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 719408-05 | 56232 |
| MILR94 | 81349 |
| MIL-PRF-94/2 | 81349 |
| RV5LAYSB102A | 81349 |
| RV5LAYSB1023 | 81349 |
| RV5LAYSB102B | 81349 |
| RV5LAYSB102A1 | 81349 |
| 625006-068 | 12436 |
| 380-6291-000 | 13499 |
| 380-2904-000 | 13499 |
Supersedes
This item replaces cancelled NIINs 000237871 · 004817279 · 006158059 · 008224064. An older drawing citing one of those numbers resolves here.