NSN 5905-00-651-1632 · NIIN 006511632 · FSC 5905
NO DASHES 5905006511632
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
42 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.4380 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 2.120 |
| AEFY | SHAFT END PLAY | INCHES 0.00500 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.00100 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 1.50 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 349.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 2.20 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0630 |
| AEDX | SHAFT STYLE | |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 1.3120 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.312 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | 1ST SECTION -0.20 TO 0.20 AND 2ND SECTION -0.20 TO 0.20 AND 3RD SECTION -1.50 TO 1.50 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 80.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -20.0 TO 20.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 0.5 |
| CRGM | FUNCTION CONFORMITY PER SECTION | 1ST SECTION ABSOLUTE LINEARITY AND 2ND SECTION ABSOLUTE LINEARITY AND 3RD SECTION ABSOLUTE CONFORMITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | ALL SECTIONS 1 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | DEG ANGULAR ROTATION ALL SECTIONS -1.0 TO 1.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 1ST SECTION -1.0 TO 1.0 AND 2ND SECTION -1.0 TO 1.0 AND 3RD SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | 1ST SECTION LINEAR AND 2ND SECTION LINEAR AND 3RD SECTION TANGENTIAL PORM 75 DEG |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0930 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.453 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.249 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.688 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AEGA | LATERAL RUNOUT | INCHES 0.001 |
| AAPN | SECTION QUANTITY | 3 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| BYDT | BEARING TYPE | SHAFT BEARING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 50.000 AND KILOHMS 2ND SECTION 50.000 AND KILOHMS 3RD SECTION 20.000 |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | ALL SECTIONS 172.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 10.0 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 12 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.0015 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 40.0 |