NSN 5905-00-651-1634 · NIIN 006511634 · FSC 5905
NO DASHES 5905006511634
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -1.0 TO 1.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 3 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 10001-1277247 |
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 1.31200 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.06200 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 1.312 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.07300 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.438 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.249 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.688 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS GRAPH |
| AEFD | ACTUATOR TYPE | DOUBLE ENDED SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 349.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.60 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 1.10 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -40.0 TO 40.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 2.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS ABSOLUTE LINEARITY |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 25.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.35 TO 0.35 |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CW |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 2.393 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.43800 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.09300 |
| AEDX | SHAFT STYLE | |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 40.0 |