NSN 5905-00-681-1184 · NIIN 006811184 · FSC 5905
NO DASHES 5905006811184
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 25.0 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 4.470 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-22 TO 9 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 1.000 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 4.060 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 2.905 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 2.030 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.500 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 305.0 |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 12:00 OCLOCK |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 150.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.875 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.375 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-22 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| M22/09-00221SD | 81349 |
| MILR22-9 | 81349 |
| RP301SD102KK | 81349 |
| MIL-PRF-22/9 | 81349 |
Supersedes
This item replaces cancelled NIIN 009513379. An older drawing citing one of those numbers resolves here.