NSN 5905-00-681-5186 · NIIN 006815186 · FSC 5905
NO DASHES 5905006815186
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 12 |
| AXGY | MOUNTING METHOD | BRACKET(S) AND THREADED HOLE(S) |
| AAPN | SECTION QUANTITY | 4 |
| AAQL | BODY STYLE | |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS 1ST SECTION 150.000 AND OHMS 2ND SECTION 250.000 AND OHMS 3RD SECTION 500.000 AND OHMS 4TH SECTION 250.000 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 1.562 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -20.0 TO 20.0 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 300.0 |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.500 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 300.0 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 7.500 |
| ABNB | FIRST FLAT LENGTH | INCHES NOMINAL 0.344 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 1.000 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.375 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 5.500 |
| ABNC | FLAT HEIGHT | INCHES NOMINAL 0.219 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.562 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 40.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 25.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 10 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 6:00 OCLOCK |
| AEDX | SHAFT STYLE | |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.164 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -10.0 TO 10.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 340.0 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 44770 | 44655 |
| 598-401-1892608REVBPC29 | 80064 |
| 9867-08X5REVBPC29 | 96169 |