NSN 5905-00-682-0130 · NIIN 006820130 · FSC 5905
NO DASHES 5905006820130
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.516 AND INCHES MAXIMUM 0.547 |
| CQPH | DEVICE DESIGN TYPE | AT 9:00 OCLOCK |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 10.000 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CBBL | FEATURES PROVIDED | SHAFT SEAL |
| AXGY | MOUNTING METHOD | LOCKING BUSHING |
| BYDT | BEARING TYPE | SHAFT BALL |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.625 AND INCHES MAXIMUM 1.687 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.251 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.984 AND INCHES MAXIMUM 1.016 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 1.891 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 4.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -1.0 TO 1.0 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 3 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.50 TO 0.50 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.484 AND INCHES MAXIMUM 0.516 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.875 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 1.968 |
| AEDX | SHAFT STYLE |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| GA50907L13 | 64959 |
| RV1 5-8-5455H | 99957 |
| 9138955 | 18876 |
| C158 | 18065 |
| GA50907L13 | 18876 |