NSN 5905-00-701-5755 · NIIN 007015755 · FSC 5905
NO DASHES 5905007015755
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAQL | BODY STYLE | |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| AAPN | SECTION QUANTITY | 1 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 6120.0 AND MAXIMUM 9720.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 6.000 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.088 AND INCHES MAXIMUM 0.098 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.100 AND INCHES MAXIMUM 0.130 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.060 AND INCHES MAXIMUM 0.080 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES MINIMUM 0.995 AND INCHES MAXIMUM 1.005 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.300 AND INCHES MAXIMUM 0.330 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 8.00 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AEDX | SHAFT STYLE | |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 50.000 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILR27208-8 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.240 AND INCHES MAXIMUM 1.260 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.180 AND INCHES MAXIMUM 0.200 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.75 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 6120.0 AND MAXIMUM 9720.0 |
Cross-references
23 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1960371-10 | 53711 |
| 224L-638-500 | 80294 |
| 224L638-051 | 80294 |
| 236L1-500 | 80294 |
| 224L825-500 | 80294 |
| RTR12DL500P | 81349 |
| MILR27208-8 | 81349 |
| RT12C2L500 | 81349 |
| M39015/1-011LP | 81349 |
| MIL-R-39015/1 | 81349 |
| M39015-1-011LM | 81349 |
| MIL-PRF-27208/8 | 81349 |
| 295-500HM1-2W | 91637 |
| 444-0013-006 | 94756 |
| 438R2-13 | 94756 |
| 444-0180-006 | 94756 |
| 2850L500 | 96791 |
| 352250002855 | H0203 |
| VBE668L50E | H0203 |
| G395830-3 | 01714 |
| 42-9-112-051 | 02111 |
| 42-9-112-500 | 02111 |
| A025C3-051 | 02297 |
Supersedes
This item replaces cancelled NIINs 000189854 · 000570161 · 004225298 · 005574536 · 006832737 · 006783471 · 007261773 · 007835256 · 008094786 · 008360112 · 009047018 · 009167749 · 009934024. An older drawing citing one of those numbers resolves here.