NSN 5905-00-722-3822 · NIIN 007223822 · FSC 5905
NO DASHES 5905007223822
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.656 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-94 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.251 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 128.00 |
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.422 AND INCHES MAXIMUM 0.454 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-94 TO 4 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.745 AND INCHES MAXIMUM 0.755 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 1.274 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | LOCKING BUSHING |
| CBBL | FEATURES PROVIDED | SHAFT LOCKING DEVICE |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 251.0 AND MAXIMUM 318.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 120.0 |
| CQPH | DEVICE DESIGN TYPE | AT 9:00 OCLOCK NONTURN |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.031 AND INCHES MAXIMUM 1.125 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.890 AND INCHES MAXIMUM 0.922 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 5.0 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.484 AND INCHES MAXIMUM 0.516 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.437 AND INCHES MAXIMUM 0.469 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| RQ11-114 | 75042 |
| MILR94-4 | 81349 |
| RV2LAYSA502A | 81349 |
| MIL-PRF-94/4 | 81349 |
| 380-2606-000 | 13499 |
Supersedes
This item replaces cancelled NIIN 002581116. An older drawing citing one of those numbers resolves here.