NSN 5905-00-723-3599 · NIIN 007233599 · FSC 5905
NO DASHES 5905007233599
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
40 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.50 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 128.00 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.60 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | SINGLE SECTION 3 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | DEG ANGULAR ROTATION 1ST SECTION -2.0 TO 2.0 AND DEG ANGULAR ROTATION 2ND SECTION -10.0 TO 20.0 AND DEG ANGULAR ROTATION 3RD SECTION -10.0 TO 10.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 3 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 3600.0 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.594 AND INCHES MAXIMUM 0.656 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.562 AND INCHES MAXIMUM 1.580 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 0.87500 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.06200 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.156 AND INCHES MAXIMUM 2.236 |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 1.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BALL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 15.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 3600.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.05 TO 0.05 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 85.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 24930-123081 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -3.0 TO 3.0 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.125 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.5 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.62400 AND INCHES MAXIMUM 0.62500 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.06200 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.750 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.05700 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.875 |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |