NSN 5905-00-724-5664 · NIIN 007245664 · FSC 5905
NO DASHES 5905007245664
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.100 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.093 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.083 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 9000.0 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.500 |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.190 |
| ADAU | BODY HEIGHT | INCHES NOMINAL 0.500 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 99971-773567019 |
| AAQL | BODY STYLE | |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 20.000 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| AAPN | SECTION QUANTITY | 1 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 9000.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 175.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES NOMINAL 0.520 |
Cross-references
12 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3250L1-200 | 32997 |
| 3250L1-200 | 80294 |
| RTR22DL200P | 81349 |
| MIL-R-39015/2 | 81349 |
| M39015-2-010LM | 81349 |
| RT22C2L200 | 81349 |
| RTR22DL200M | 81349 |
| M39015/2-010LP | 81349 |
| MIL-R-27208/4 | 81349 |
| MIL-C-39015/2 | 81349 |
| 7735670P19 | 99971 |
| 7735670P0019 | 99971 |
Supersedes
This item replaces cancelled NIINs 009951006 · 010738577. An older drawing citing one of those numbers resolves here.