NSN 5905-00-728-4287 · NIIN 007284287 · FSC 5905
NO DASHES 5905007284287
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 5.00 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.090 AND INCHES MAXIMUM 0.110 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.058 AND INCHES MAXIMUM 0.098 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.757 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.172 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILR27208-4 |
| ABXF | SHAFT LENGTH | INCHES MAXIMUM 0.045 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.540 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.180 AND INCHES MAXIMUM 0.230 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.093 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES NOMINAL 0.520 |
| AXGY | MOUNTING METHOD | TERMINAL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 1.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 7200.0 AND MAXIMUM 16200.0 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES MINIMUM 0.090 AND INCHES MAXIMUM 0.110 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.75 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.180 AND INCHES MAXIMUM 0.230 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| RT22C2W102 | 81349 |
| MILR27208-4 | 81349 |
| 418239-23 | 96214 |
Supersedes
This item replaces cancelled NIIN 002252080. An older drawing citing one of those numbers resolves here.