NSN 5905-00-752-3411 · NIIN 007523411 · FSC 5905
NO DASHES 5905007523411
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.8 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.7500 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -600.0 TO 600.0 |
| AAPN | SECTION QUANTITY | 1 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 2.000 |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | SINGLE SECTION 90.0 AND SINGLE SECTION 270.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 360.0 |
| CRJS | FIXED TAP QUANTITY PER SECTION | SINGLE SECTION 2 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | DEG ANGULAR ROTATION SINGLE SECTION -1.0 TO 1.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 125.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 5 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 0.8700 AND INCHES MAXIMUM 0.9050 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.781 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0570 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.860 AND INCHES MAXIMUM 0.910 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.125 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.750 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.600 AND INCHES MAXIMUM 0.725 |
| AEDX | SHAFT STYLE |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 114B7077-1 | 78022 |
| 3419 | 04454 |
| 41914 | 10112 |