NSN 5905-00-761-5398 · NIIN 007615398 · FSC 5905
NO DASHES 5905007615398
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES MINIMUM 0.995 AND INCHES MAXIMUM 1.005 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 6120.0 AND MAXIMUM 9720.0 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 10.000 |
| AAPN | SECTION QUANTITY | 1 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.300 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.088 AND INCHES MAXIMUM 0.098 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.100 AND INCHES MAXIMUM 0.130 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.036 AND INCHES MAXIMUM 0.064 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 6120.0 AND MAXIMUM 9720.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 8.00 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.690 AND INCHES MAXIMUM 0.710 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.280 AND INCHES MAXIMUM 0.360 |
| AEDX | SHAFT STYLE | |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.75 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.723 AND INCHES MAXIMUM 1.877 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.469 AND INCHES MAXIMUM 0.531 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.749 AND INCHES MAXIMUM 0.891 |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | INCHES NOMINAL 0.100 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.300 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES MINIMUM 0.290 AND INCHES MAXIMUM 0.310 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILR27208-3 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.218 AND INCHES MAXIMUM 1.282 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| RT11C2P103 | 81349 |
| MILR27208-3 | 81349 |
Supersedes
This item replaces cancelled NIIN 008530692. An older drawing citing one of those numbers resolves here.