NSN 5905-00-761-9140 · NIIN 007619140 · FSC 5905
NO DASHES 5905007619140
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD TER-INALS |
| PRMT | PRECIOUS MATERIAL | GOLD |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 3 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 350.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.50 |
| ABWV | SHAFT DIAMETER | INCHES MAXIMUM 0.2497 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| AAVL | PILOT DIAMETER | INCHES MAXIMUM 1.5620 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.604 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 1.562 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0730 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.766 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 3.0 |
| BYDT | BEARING TYPE | SHAFT BALL |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 10.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.25 TO 0.25 |
| AEDX | SHAFT STYLE | |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 1.50 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.7500 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.002 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.719 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.885 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0930 |