NSN 5905-00-764-3239 · NIIN 007643239 · FSC 5905
NO DASHES 5905007643239
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
30 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 85.0 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES MINIMUM 0.190 AND INCHES MAXIMUM 0.210 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.5 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.020 AND INCHES MAXIMUM 1.100 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.225 AND INCHES MAXIMUM 0.275 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.535 AND INCHES MAXIMUM 0.585 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.270 AND INCHES MAXIMUM 0.290 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.088 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 5400.0 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.490 AND INCHES MAXIMUM 0.510 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 5400.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.350 AND INCHES MAXIMUM 0.370 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED LOWER ADJACENT SIDE SINGLE ROW |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | INCHES NOMINAL 0.200 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 2.000 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.975 AND INCHES MAXIMUM 1.025 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES MINIMUM 0.825 AND INCHES MAXIMUM 0.835 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.090 AND INCHES MAXIMUM 0.110 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.045 AND INCHES MAXIMUM 0.075 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.270 AND INCHES MAXIMUM 0.290 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 000345871. An older drawing citing one of those numbers resolves here.