NSN 5905-00-764-4885 · NIIN 007644885 · FSC 5905
NO DASHES 5905007644885
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.578 AND INCHES MAXIMUM 0.672 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.625 AND INCHES MAXIMUM 0.751 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 80.00 |
| AEDX | SHAFT STYLE | |
| AAPN | SECTION QUANTITY | 1 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | HEAT SINK SINGLE SECTION 12.5 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 25.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-22 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-22 TO 1 |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 6:00 OCLOCK |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 500.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 290.0 AND MAXIMUM 305.0 |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 0.984 AND INCHES MAXIMUM 1.141 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.203 AND INCHES MAXIMUM 1.423 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.844 AND INCHES MAXIMUM 0.906 |
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.235 AND INCHES MAXIMUM 0.265 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.250 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.124 AND INCHES MAXIMUM 0.126 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.219 AND INCHES MAXIMUM 0.297 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 340.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
Cross-references
15 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| H12-1-2-501 | 24681 |
| E500R1 | 44655 |
| E500S1 | 44655 |
| RES500 | 44655 |
| 60054 | 44655 |
| 50201-5013-13 | 79343 |
| 50201-5011-13 | 79343 |
| MIL-PRF-22/1 | 81349 |
| RP061SB501KK | 81349 |
| MILR22-1 | 81349 |
| M22/01-00191SB | 81349 |
| H12 1-2-500 | 83777 |
| 50201-5011-13 | 93568 |
| 50201-5013-13 | 93568 |
| RP061SB501KK | 96906 |
Supersedes
This item replaces cancelled NIINs 000850098 · 008279577 · 008272526. An older drawing citing one of those numbers resolves here.