NSN 5905-00-780-9488 · NIIN 007809488 · FSC 5905
NO DASHES 5905007809488
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
42 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 22 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | DEG ANGULAR ROTATION SINGLE SECTION -0.5 TO 0.5 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CRJS | FIXED TAP QUANTITY PER SECTION | SINGLE SECTION 19 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 50.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 7199.5 AND MAXIMUM 7200.5 |
| BYDT | BEARING TYPE | SHAFT BALL |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0930 |
| AEDX | SHAFT STYLE | |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW-CW |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AEGA | LATERAL RUNOUT | INCHES 0.002 |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 1.8750 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 2.203 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 5.072 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.05 TO 0.05 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 6.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0620 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 2.0000 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.249 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.641 AND INCHES MAXIMUM 0.703 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.30 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 20.000 |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | SINGLE SECTION 360.0 AND SINGLE SECTION 720.0 AND SINGLE SECTION 1080.0 AND SINGLE SECTION 1440.0 AND SINGLE SECTION 1800.0 AND SINGLE SECTION 2160.0 AND SINGLE SECTION 2520.0 AND SINGLE SECTION 2880.0 AND SINGLE SECTION 3240.0 AND SINGLE SECTION 3600.0 AND SINGLE SECTION 3960.0 AND SINGLE SECTION 4320.0 AND SINGLE SECTION 4680.0 AND SINGLE SECTION 5040.0 AND SINGLE SECTION 5400.0 AND SINGLE SECTION 5760.0 AND SINGLE SECTION 6120.0 AND SINGLE SECTION 6480.0 AND SINGLE SECTION 6840.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 7380.0 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.00100 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.812 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 4.400 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.812 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7609-1619-0 | 73138 |
| 45677 | 82340 |