NSN 5905-00-781-7274 · NIIN 007817274 · FSC 5905
NO DASHES 5905007817274
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.500 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 105.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -20.0 TO 20.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 2.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -3.0 TO 3.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 55.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 6 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 3.099 AND INCHES MAXIMUM 3.135 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 3.568 AND INCHES MAXIMUM 3.666 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.6240 AND INCHES MAXIMUM 0.6250 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0630 AND INCHES MAXIMUM 0.0740 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.865 AND INCHES MAXIMUM 0.875 |
| AAPN | SECTION QUANTITY | 2 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6240 AND INCHES MAXIMUM 0.6250 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0600 AND INCHES MAXIMUM 0.0640 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS ALL SECTIONS 5.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 3600.0 AND MAXIMUM 3610.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.15 TO 0.15 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.00200 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.001 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BEARING |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.50 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 0.70 |
| AEFY | SHAFT END PLAY | INCHES 0.00200 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 3600.0 |
| AEFZ | SHAFT RUNOUT | INCHES 0.002 |
| AEGA | LATERAL RUNOUT | INCHES 0.002 |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 1.037 AND INCHES MAXIMUM 1.047 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 0.8700 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0580 AND INCHES MAXIMUM 0.0630 |
| AEDX | SHAFT STYLE | |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.70 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 381-1436-000 | 95105 |
| 502-0241 | 02111 |
| 502-241 | 02111 |
| 381-1436-000 | 13499 |
| 381-1436-00 | 13499 |