NSN 5905-00-786-8517 · NIIN 007868517 · FSC 5905
NO DASHES 5905007868517
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
34 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEDX | SHAFT STYLE | |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 8.00 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.300 |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.723 AND INCHES MAXIMUM 1.877 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.469 AND INCHES MAXIMUM 0.531 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.250 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 10.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 6120.0 AND MAXIMUM 9720.0 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.749 AND INCHES MAXIMUM 0.841 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.300 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.280 AND INCHES MAXIMUM 0.360 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 6120.0 AND MAXIMUM 9720.0 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES MINIMUM 0.290 AND INCHES MAXIMUM 0.310 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.088 AND INCHES MAXIMUM 0.098 |
| AEEZ | CONTACT ARM ELECTRICAL OFF POSITION | FULLY CCW |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | INCHES NOMINAL 0.100 |
| AAPN | SECTION QUANTITY | 1 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--ILR27208-3 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.100 AND INCHES MAXIMUM 0.130 |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.75 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES MINIMUM 0.995 AND INCHES MAXIMUM 1.005 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.036 AND INCHES MAXIMUM 0.069 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.690 AND INCHES MAXIMUM 0.710 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MILR27208-3 | 81349 |
| RT11C2P100 | 81349 |