NSN 5905-00-788-1417 · NIIN 007881417 · FSC 5905
NO DASHES 5905007881417
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
39 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.30 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.1870 AND INCHES MAXIMUM 1.1880 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | SINGLE SECTION 1 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | OHMS SINGLE SECTION -1.0 TO 1.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.001 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.30 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AAPN | SECTION QUANTITY | 1 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 20.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.20 TO 0.20 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 125.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| AEGA | LATERAL RUNOUT | INCHES 0.001 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 350.0 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 1.3070 AND INCHES MAXIMUM 1.3170 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | SINGLE SECTION 10000.0 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 20.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 4 |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 1.307 AND INCHES MAXIMUM 1.317 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.470 AND INCHES MAXIMUM 0.530 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.745 AND INCHES MAXIMUM 0.755 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.307 AND INCHES MAXIMUM 1.317 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.437 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 1.187 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0570 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.125 |