NSN 5905-00-792-7426 · NIIN 007927426 · FSC 5905
NO DASHES 5905007927426
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 360.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 4.0 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.8745 AND INCHES MAXIMUM 1.8750 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION 360 DEG SINE-COSINE |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 4 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.800 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 1.8745 AND INCHES MAXIMUM 1.8755 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0550 AND INCHES MAXIMUM 0.0650 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.995 AND INCHES MAXIMUM 2.005 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.249 AND INCHES MAXIMUM 0.250 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.734 AND INCHES MAXIMUM 0.766 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 1.050 |
| ADAV | OVERALL DIAMETER | INCHES MINIMUM 1.995 AND INCHES MAXIMUM 2.005 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 1.9950 AND INCHES MAXIMUM 2.0050 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.40 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0550 AND INCHES MAXIMUM 0.0650 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 20.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| AEDX | SHAFT STYLE | |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0550 AND INCHES MAXIMUM 0.0650 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.25 TO 0.25 |