NSN 5905-00-801-6573 · NIIN 008016573 · FSC 5905
NO DASHES 5905008016573
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABXF | SHAFT LENGTH | INCHES MINIMUM 1.390 AND INCHES MAXIMUM 1.430 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.500 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 70.0 |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 10001-1202438 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 120.0 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.920 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 1.485 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR 1ST SECTION 1.0 AND FREE AIR 2ND SECTION 1.0 AND FREE AIR 3RD SECTION 2.0 |
| AAPN | SECTION QUANTITY | 3 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 3.350 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.170 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.250 |
| CQPH | DEVICE DESIGN TYPE | AT 9:00 OCLOCK NONTURN |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS 1ST SECTION 150.0 AND OHMS 2ND SECTION 150.0 AND OHMS 3RD SECTION 500.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 312.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.510 AND INCHES MAXIMUM 0.550 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 312.0 |