NSN 5905-00-803-0245 · NIIN 008030245 · FSC 5905
NO DASHES 5905008030245
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEDX | SHAFT STYLE | |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 280.0 AND MAXIMUM 305.0 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.531 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 280.0 AND MAXIMUM 305.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.495 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.590 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-19 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-19 TO 3 |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 9:00 OCLOCK |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 4.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAPN | SECTION QUANTITY | 1 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 128.00 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.875 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.375 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.620 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 2.135 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 20.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 105.0 |
| AAQL | BODY STYLE |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| RA301SA200J | 81349 |
| MIL-PRF-19/3 | 81349 |
| MILR19 | 81349 |
| RA30NASD200A | 81349 |
| RA301SA200AJ | 81349 |
Supersedes
This item replaces cancelled NIIN 009130301. An older drawing citing one of those numbers resolves here.