NSN 5905-00-806-2979 · NIIN 008062979 · FSC 5905
NO DASHES 5905008062979
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 7920.0 |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -50.0 TO 50.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| BYDT | BEARING TYPE | SHAFT BEARING |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 150.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED LOWER ADJACENT SIDE TWO ROWS |
| CBBL | FEATURES PROVIDED | HUMIDITY PROOF |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.078 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 10.0 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 5.00 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES MINIMUM 0.995 AND INCHES MAXIMUM 1.005 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 7920.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 5.00 |
| ADAU | BODY HEIGHT | INCHES MAXIMUM 0.360 |
| AEDX | SHAFT STYLE | |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| ADAT | BODY WIDTH | INCHES MAXIMUM 0.300 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.030 AND INCHES MAXIMUM 0.040 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.330 AND INCHES MAXIMUM 1.340 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.120 AND INCHES MAXIMUM 0.130 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES NOMINAL 0.093 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAQL | BODY STYLE | |
| AAPN | SECTION QUANTITY | 1 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 224S-10K | 32997 |
| 3057J-1-103 | 32997 |
| 6163201-3 | 53711 |
| 1780438-7 | 56232 |
| 236S369-103J | 80294 |
| 200S-1-103 | 80294 |
| 400-202-103 | 84048 |
| 1690-10K | 91637 |
| 5905PL1296916 | 9009H |
| 243380-103 | 96795 |
| 037151-10K | 08199 |
Supersedes
This item replaces cancelled NIINs 000567738 · 000617424 · 001130380 · 006818763 · 007552628 · 008195707 · 008926316 · 009035217 · 009885913. An older drawing citing one of those numbers resolves here.