NSN 5905-00-811-7469 · NIIN 008117469 · FSC 5905
NO DASHES 5905008117469
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.359 AND INCHES MAXIMUM 0.391 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.703 AND INCHES MAXIMUM 0.797 |
| AAPN | SECTION QUANTITY | 1 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 120.0 |
| CQPH | DEVICE DESIGN TYPE | AT 9:00 OCLOCK NONTURN |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.5 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.250 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 295.0 AND MAXIMUM 305.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 80.00 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-94 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 10.0 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 0.953 |
| AEDX | SHAFT STYLE | |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES MINIMUM 0.234 AND INCHES MAXIMUM 0.266 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.359 AND INCHES MAXIMUM 0.391 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.344 AND INCHES MAXIMUM 0.406 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.719 AND INCHES MAXIMUM 0.781 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-94 TO 2 |
| AAQL | BODY STYLE | |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.124 AND INCHES MAXIMUM 0.126 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MILR94-2 | 81349 |
| MIL-PRF-94/2 | 81349 |
| RV5NAYSL103A | 81349 |
Supersedes
This item replaces cancelled NIINs 005090672 · 004969142 · 005779646 · 009592938. An older drawing citing one of those numbers resolves here.