NSN 5905-00-813-1746 · NIIN 008131746 · FSC 5905
NO DASHES 5905008131746
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 0.545 |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.480 AND INCHES MAXIMUM 0.520 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.170 AND INCHES MAXIMUM 0.210 |
| ABTD | MOUNTING SLOT WIDTH | INCHES MINIMUM 0.090 AND INCHES MAXIMUM 0.096 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| AXGY | MOUNTING METHOD | SLOT |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES MINIMUM 0.500 AND INCHES MAXIMUM 0.540 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.480 AND INCHES MAXIMUM 0.520 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 50.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 7920.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 175.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 10001--IL-STD-202A |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.058 AND INCHES MAXIMUM 0.098 |
| ABXF | SHAFT LENGTH | INCHES MAXIMUM 0.045 |
| AAPN | SECTION QUANTITY | 1 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.170 AND INCHES MAXIMUM 0.210 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.480 AND INCHES MAXIMUM 0.520 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
Cross-references
18 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 3250L-1-50K | 32997 |
| 201-00 | 35009 |
| 3068309-10 | 59364 |
| 1076-57-3 | 72314 |
| 3250L1-503 | 80294 |
| 161214-005 | 81413 |
| G121-659-020 | 84347 |
| 413250-10 | 96214 |
| 381-9039-00 | 95105 |
| 381-9039-000 | 95105 |
| 313-118HS50K | 94271 |
| 300-66HS50K | 94271 |
| 55-1-10-503 | 02111 |
| 300-66HS50K | 0EBU2 |
| 2265001-9 | 10001 |
| 381-9039-00 | 13499 |
| 541S503-2 | 16170 |
| 8437626 | 19204 |
Supersedes
This item replaces cancelled NIINs 000109687 · 000103014 · 000580024 · 009813009. An older drawing citing one of those numbers resolves here.