NSN 5905-00-815-5498 · NIIN 008155498 · FSC 5905
NO DASHES 5905008155498
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| CQPH | DEVICE DESIGN TYPE | AT 9:00 OCLOCK NONTURN |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 120.0 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AXGY | MOUNTING METHOD | LOCKING BUSHING |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.438 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AEDX | SHAFT STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.031 AND INCHES MAXIMUM 1.125 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.890 AND INCHES MAXIMUM 0.922 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.625 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-94 TO 4 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.375 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.437 AND INCHES MAXIMUM 0.469 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 1.274 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 10.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 251.0 AND MAXIMUM 318.0 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-94 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 128.00 |
Cross-references
9 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| R1625 | 58880 |
| RV2LAYSA103A | 81349 |
| MILR94-4 | 81349 |
| RV2LAYSA103B | 81349 |
| MIL-PRF-94/4 | 81349 |
| 380-2607-000 | 13499 |
| TYPEA47 | 12697 |
| 078-20039-030 | 12131 |
| 8136981 | 18876 |
Supersedes
This item replaces cancelled NIINs 000341745 · 000694409 · 003442449 · 005029209 · 005492773 · 008063628 · 008098680. An older drawing citing one of those numbers resolves here.