NSN 5905-00-822-2706 · NIIN 008222706 · FSC 5905
NO DASHES 5905008222706
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.07300 AND INCHES MAXIMUM 0.08300 |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 1.625 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.489 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 2.031 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 1.74500 AND INCHES MAXIMUM 1.75500 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.56100 AND INCHES MAXIMUM 1.56200 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.08800 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 2.489 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 3.0 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 85.0 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.750 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.969 AND INCHES MAXIMUM 1.031 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -1.0 TO 1.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.50 TO 0.50 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 145.0 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.08800 AND INCHES MAXIMUM 0.09800 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 340.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.50 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BEARING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 10.000 AND KILOHMS 2ND SECTION 10.000 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 6 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |