NSN 5905-00-825-0074 · NIIN 008250074 · FSC 5905
NO DASHES 5905008250074
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
37 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | ALL SECTIONS -0.10 TO 0.10 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 1.40 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 1.20 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 125.0 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 3.000 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 0.875 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 0.8750 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0620 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 3600.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 85.0 |
| AEFZ | SHAFT RUNOUT | INCHES 0.003 |
| AAPN | SECTION QUANTITY | 2 |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS ALL SECTIONS 500.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 3715.0 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 3.000 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 0.625 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0570 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR 1ST SECTION 1.3 AND FREE AIR 2ND SECTION 1.5 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -5.0 TO 5.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 6 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0620 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AEGD | MECHANICAL BACKLASH IN DEG ANGULAR ROTATION | 1.0 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BYDT | BEARING TYPE | SHAFT BALL |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.125 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.438 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AAQL | BODY STYLE | |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 0.6250 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.875 |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7223-1557-0 | 73138 |
| 381-1311-00 | 95105 |
| 381-1311-000 | 95105 |
| 502-231 | 02111 |
| 500-830 | 02111 |
| 381-1311-00 | 13499 |