NSN 5905-00-825-2039 · NIIN 008252039 · FSC 5905
NO DASHES 5905008252039
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.250 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 1.437 AND INCHES MAXIMUM 1.443 |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0880 AND INCHES MAXIMUM 0.0980 |
| AEDX | SHAFT STYLE | |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.960 AND INCHES MAXIMUM 1.080 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 2.397 AND INCHES MAXIMUM 2.523 |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | SINGLE SECTION 150.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.50 TO 0.50 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 110.0 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| ABNB | FIRST FLAT LENGTH | INCHES MINIMUM 0.747 AND INCHES MAXIMUM 0.753 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MAXIMUM 1.7750 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.744 AND INCHES MAXIMUM 1.750 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | SINGLE SECTION 1 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | DEG ANGULAR ROTATION SINGLE SECTION -2.0 TO 2.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -2.0 TO 2.0 |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 50.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 4 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.2494 AND INCHES MAXIMUM 0.2497 |
| ABPC | UNDERCUT WIDTH | INCHES NOMINAL 0.0730 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 2.000 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 1.995 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 1.5420 AND INCHES MAXIMUM 1.5620 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| L603000010 | 36090 |
| 200-653 | 02111 |
| 2041716 | 10001 |
| 1764-2 | 18053 |