NSN 5905-00-826-2291 · NIIN 008262291 · FSC 5905
NO DASHES 5905008262291
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.234 AND INCHES MAXIMUM 1.266 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.270 AND INCHES MAXIMUM 0.290 |
| AAPN | SECTION QUANTITY | 1 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 9000.0 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.234 AND INCHES MAXIMUM 0.266 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.312 |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.484 AND INCHES MAXIMUM 0.516 |
| APXH | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| AXGY | MOUNTING METHOD | TERMINAL AND UNTHREADED HOLE(S) |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | INCHES NOMINAL 0.100 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 1.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 9000.0 |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 0.812 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| TTQY | TERMINAL TYPE AND QUANTITY | PIN 3 |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | INCHES MINIMUM 0.690 AND INCHES MAXIMUM 0.710 |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | INCHES NOMINAL 0.300 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 105.0 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.25 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.046 AND INCHES MAXIMUM 0.078 |
| AAQL | BODY STYLE | |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.109 AND INCHES MAXIMUM 0.141 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.296 AND INCHES MAXIMUM 0.328 |
| AEDX | SHAFT STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.086 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES MINIMUM 0.995 AND INCHES MAXIMUM 1.005 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 275P1-102 | 32997 |
| 64A0000-004 | 4S536 |
| 56D1 | 52983 |
| 275-1-102 | 80294 |
| 275P1-102 | F0978 |
| RP548-05-102 | S3090 |
| 56D1 | 0ZBJ4 |
Supersedes
This item replaces cancelled NIIN 008405487. An older drawing citing one of those numbers resolves here.