NSN 5905-00-828-5807 · NIIN 008285807 · FSC 5905
NO DASHES 5905008285807
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-94 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 250.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 251.0 AND MAXIMUM 318.0 |
| CQDB | RESISTANCE TEMP CHARACTERISTIC RANGE PER SECTION IN PERCENT | -55 DEG CELSIUS SINGLE SECTION -3.0 TO 0.0 AND -25 DEG CELSIUS SINGLE SECTION -5.0 TO 10.0 AND 25 DEG CELSIUS SINGLE SECTION -5.0 TO 10.0 AND 120 DEG CELSIUS SINGLE SECTION 0.0 TO 3.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 120.0 |
| CQPH | DEVICE DESIGN TYPE | AT 9:00 OCLOCK NONTURN |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.0 |
| AEFP | NONTURN DEVICE RADIUS | INCHES NOMINAL 0.438 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.453 |
| AEDX | SHAFT STYLE | |
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABPM | BODY DIAMETER | INCHES NOMINAL 0.906 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.250 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.875 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.375 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-94 TO 4 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
Cross-references
8 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2100-0408 | 1MY97 |
| 2100-0408 | 28480 |
| 2-250OHMPORM30PCT 7/8 IN. SHAFT | 71590 |
| RV2NAYSD251B | 81349 |
| MILR94-4 | 81349 |
| RV2NAYSD251A | 81349 |
| MIL-PRF-94/4 | 81349 |
| 45-250OHMPORM30PCT 7/8 IN. SHAFT | 11236 |
Supersedes
This item replaces cancelled NIINs 000876113 · 001057519 · 008095419. An older drawing citing one of those numbers resolves here.