NSN 5905-00-833-4612 · NIIN 008334612 · FSC 5905
NO DASHES 5905008334612
In Stock
RESISTOR,VARIABLE,NONWIRE WOUND,
Resistor
Technical characteristics
33 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0620 |
| AEFZ | SHAFT RUNOUT | INCHES 0.001 |
| AAQL | BODY STYLE | |
| AEGB | PILOT DIAMETER RUNOUT | INCHES 0.00100 |
| AEGC | SHAFT RADIAL PLAY | INCHES 0.002 |
| AEDX | SHAFT STYLE | |
| AEGA | LATERAL RUNOUT | INCHES 0.0015 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.313 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.768 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.0620 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 20.000 |
| AEFY | SHAFT END PLAY | INCHES 0.00200 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION ABSOLUTE LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 343.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.35 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.35 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.1242 AND INCHES MAXIMUM 0.1247 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| ABPA | UNDERCUT DIAMETER | INCHES MAXIMUM 0.975 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0570 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.073 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION EQUATION |
| CXHN | SHAFT BEARING TYPE | BEARING |
| FEAT | SPECIAL FEATURES | 105 TOOTH GEAR ON REAR END OF RESISTOR |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 96467-712-50 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.9683 AND INCHES MAXIMUM 0.9688 |
| CQTM | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| AAPN | SECTION QUANTITY | 1 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0620 |