NSN 5905-00-836-3717 · NIIN 008363717 · FSC 5905
NO DASHES 5905008363717
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
42 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | ALL SECTIONS -3.0 TO 3.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.458 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.500 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 1.093 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MAXIMUM 1.0880 |
| AEDA | MOUNTING LIP DEPTH | INCHES MAXIMUM 0.0640 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.030 |
| ABPC | UNDERCUT WIDTH | INCHES MAXIMUM 0.0660 |
| ABPM | BODY DIAMETER | INCHES MAXIMUM 1.088 |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 135.0 |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 45.0 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.125 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0420 |
| CRFJ | TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | ALL SECTIONS -650.0 TO 650.0 |
| BYDT | BEARING TYPE | SHAFT BEARING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS 1ST SECTION 2.500 AND KILOHMS 2ND SECTION 1.000 AND KILOHMS 3RD SECTION 5.000 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | 1ST SECTION -0.06 TO 0.06 AND 2ND SECTION -0.06 TO 0.06 AND 3RD SECTION -1.00 TO 1.00 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | ALL SECTIONS 85.0 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 56.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| AXGY | MOUNTING METHOD | THREADED HOLE(S) |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | INCHES MAXIMUM 0.436 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 353.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.10 |
| AEFL | MAXIMUM RUNNING TORQUE | INCH-OUNCES 0.10 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.086 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | ALL SECTIONS 55.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 9 |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| AAPN | SECTION QUANTITY | 3 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 1.0025 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR ALL SECTIONS 1.5 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.542 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 227881-3REVC | 37695 |
| 227881-3 | 37695 |
| 116WS246 | 08815 |
| 1103B | 10105 |
Supersedes
This item replaces cancelled NIIN 008196836. An older drawing citing one of those numbers resolves here.