NSN 5905-00-836-6081 · NIIN 008366081 · FSC 5905
NO DASHES 5905008366081
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | OHMS SINGLE SECTION -1.0 TO 1.0 |
| CRJS | FIXED TAP QUANTITY PER SECTION | SINGLE SECTION 1 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | TURRET 4 |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.125 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 2.0 |
| AEFZ | SHAFT RUNOUT | INCHES 0.002 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.086 |
| AEDA | MOUNTING LIP DEPTH | INCHES NOMINAL 0.0600 |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | INCHES NOMINAL 0.812 |
| AEDX | SHAFT STYLE | |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 56.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| AXGY | MOUNTING METHOD | THREADED HOLE(S) |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -1.00 TO 1.00 |
| AECZ | MOUNTING LIP DIAMETER | INCHES NOMINAL 1.0930 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | INCHES NOMINAL 1.0300 |
| AAVM | PILOT LENGTH | INCHES NOMINAL 0.0400 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.078 |
| ABPA | UNDERCUT DIAMETER | INCHES NOMINAL 1.030 |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.0550 AND INCHES MAXIMUM 0.0650 |
| ABPM | BODY DIAMETER | INCHES NOMINAL 1.093 |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 120.0 |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 2.5 |
| ABXF | SHAFT LENGTH | INCHES NOMINAL 0.438 |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 0.600 |
| AAPN | SECTION QUANTITY | 1 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 85.0 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.20 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 360.0 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 350.0 |