NSN 5905-00-843-4850 · NIIN 008434850 · FSC 5905
NO DASHES 5905008434850
In Stock
RESISTOR,VARIABLE,WIRE WOUND,PRE
Resistor
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| AAPN | SECTION QUANTITY | 1 |
| AECZ | MOUNTING LIP DIAMETER | INCHES MINIMUM 0.8650 AND INCHES MAXIMUM 0.8950 |
| AEDA | MOUNTING LIP DEPTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| AEDX | SHAFT STYLE | |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ADAQ | BODY LENGTH | INCHES MAXIMUM 1.125 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 0.70 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 10.00 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 0.972 |
| BYDT | BEARING TYPE | SHAFT SLEEVE |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 5.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 1100.0 |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | SINGLE SECTION -0.10 TO 0.10 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED LONGITUDINALLY POSITIONED ON THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 1.5 |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| ABPC | UNDERCUT WIDTH | INCHES MINIMUM 0.05700 AND INCHES MAXIMUM 0.06700 |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -20.0 TO 20.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| FEAT | SPECIAL FEATURES | 1.0 WATT AT 70 DEG C |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER STUD 3 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 0.865 AND INCHES MAXIMUM 0.895 |
| ABPA | UNDERCUT DIAMETER | INCHES MINIMUM 0.620 AND INCHES MAXIMUM 0.625 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.562 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.125 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.406 AND INCHES MAXIMUM 0.468 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | NOMINAL 1080.0 |
| AAVL | PILOT DIAMETER | INCHES MINIMUM 0.6200 AND INCHES MAXIMUM 0.6250 |
| AAVM | PILOT LENGTH | INCHES MINIMUM 0.0570 AND INCHES MAXIMUM 0.0670 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |