NSN 5905-00-843-7207 · NIIN 008437207 · FSC 5905
NO DASHES 5905008437207
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 40.0 |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 1.749 AND INCHES MAXIMUM 2.061 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 4.0 |
| AAPN | SECTION QUANTITY | 1 |
| ABPM | BODY DIAMETER | INCHES MINIMUM 1.500 AND INCHES MAXIMUM 1.710 |
| AEFP | NONTURN DEVICE RADIUS | INCHES MINIMUM 0.516 AND INCHES MAXIMUM 0.546 |
| AJYN | SCREW THREAD DIAMETER | INCHES NOMINAL 0.375 |
| AEDX | SHAFT STYLE | |
| CQPH | DEVICE DESIGN TYPE | LOCATION NOT OTHERWISE SPECIFIED AT 9:00 OCLOCK |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABWV | SHAFT DIAMETER | INCHES MINIMUM 0.248 AND INCHES MAXIMUM 0.251 |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 1.219 AND INCHES MAXIMUM 1.281 |
| ADAP | MOUNTING BUSHING LENGTH | INCHES NOMINAL 0.375 |
| ADAQ | BODY LENGTH | INCHES MINIMUM 0.530 AND INCHES MAXIMUM 0.780 |
| ADAV | OVERALL DIAMETER | INCHES MAXIMUM 2.135 |
| AXGY | MOUNTING METHOD | STANDARD BUSHING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | OHMS SINGLE SECTION 100.000 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 6.00 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-19 |
| TTQY | TERMINAL TYPE AND QUANTITY | TAB, SOLDER LUG 3 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT SPECIFICATION 81349--IL-R-19 TO 3 |
| AEFM | MAXIMUM STOP TORQUE | INCH-OUNCES 128.00 |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -10.0 TO 10.0 |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | MINIMUM 280.0 AND MAXIMUM 305.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | MINIMUM 280.0 AND MAXIMUM 305.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 105.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNEF |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MIL-R-19/3 | 81349 |
| MIL-PRF-19/3 | 81349 |
| RA30NASG101A | 81349 |
| RA25A1SG101AK | 81349 |