NSN 5905-00-846-2284 · NIIN 008462284 · FSC 5905
NO DASHES 5905008462284
In Stock
RESISTOR,VARIABLE,WIRE WOUND,NON
Resistor
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 0.297 AND INCHES MAXIMUM 0.328 |
| CQTM | TERMINAL LOCATION | LOCATION NOT OTHERWISE SPECIFIED REAR END |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| ABWV | SHAFT DIAMETER | INCHES NOMINAL 0.093 |
| AGTP | LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | INCHES MINIMUM 0.995 AND INCHES MAXIMUM 1.005 |
| AKPV | MOUNTING FACILITY QUANTITY | 2 |
| AXGY | MOUNTING METHOD | UNTHREADED HOLE(S) |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | KILOHMS SINGLE SECTION 10.0 |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | NOMINAL 7920.0 |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | SINGLE SECTION 175.0 |
| ADAT | BODY WIDTH | INCHES MINIMUM 0.217 AND INCHES MAXIMUM 0.249 |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | FREE AIR SINGLE SECTION 0.8 |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | SINGLE SECTION -5.0 TO 5.0 |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | SINGLE SECTION -2.0 TO 2.0 |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | SINGLE SECTION 70.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| AAQL | BODY STYLE | |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABXF | SHAFT LENGTH | INCHES MINIMUM 0.047 AND INCHES MAXIMUM 0.078 |
| AAPN | SECTION QUANTITY | 1 |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 1.312 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.217 AND INCHES MAXIMUM 0.249 |
| ABTB | MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.088 |
| AEFK | MAXIMUM STARTING TORQUE | INCH-OUNCES 7.00 |
| ADAU | BODY HEIGHT | INCHES MINIMUM 0.297 AND INCHES MAXIMUM 0.328 |
| AEDX | SHAFT STYLE | |
| ADAQ | BODY LENGTH | INCHES MINIMUM 1.234 AND INCHES MAXIMUM 1.266 |